Installing LabStats

LabStats is intended to be installed on lab computers. Below are instructions to manually installing it on a lab computer for either Windows or MacOS.

 
Installing on Windows/Dell Computers
  1. Download the installer here
    -Click the down arrow at the top left
    -Save the ZIP file
    The download button is the first element on the webpage at the top left
    🔍 Click to Enlarge
  2. Extract the zip file
    -Right click on the downloaded zip file
    -Left click on "Extract All..."
  3. Run Deploy-Application.exe
    -Rapidly left click on "Deploy-Application" twice
The toolkit will automatically install and configure the LabStats.



 
Installing on MacOS/Apple Computers
  1. Download the installer here
    -Click the down arrow at the top left
    -Save the DMG file
    The download button is the first element on the webpage at the top left
    🔍 Click to Enlarge
  2. Open the DMG file
  3. Open Terminal
  4. In the terminal, type: sudo      (include the space)
    -Include the space after 'sudo'
  5. Drag and drop InstallLabStats.sh file into the terminal window
    -It should appear similar as below:
    Image of mac os terminal showing the command: sudo /Volumes/LabStats/InstallLabStats.sh
    🔍 Click to Enlarge
  6. Press the Enter/Return key
  7. Installation is Successful if you see LabStats Installation Complete
    Image of mac os terminal showing several lines of configuration output with a final line of LabStats Installation Complete
    🔍 Click to Enlarge

 

 

 

Manual Install on Non-Jamf MacOS/Apple Computers

  1. Download and mount the DMG.

  2. Open the LabStats volume from the Desktop.

  3. Launch the LabStatsInstaller.pkg.

  4. Open Terminal and type sudo followed by space.

  5. Drag the ConfigLabStats.sh script to the Terminal window and press Enter.

 

On Macs where the installer pkg was already ran, only the ConfigLabStats.sh script would need to be run.

Print Article